tortoise switches

Started by rick.geerts.3, September 02, 2017, 08:34:03 PM

Previous topic - Next topic

rick.geerts.3

Recently baught 2 used toroise went to mount them and the throw rod is to short  anybody know wer I can get a replacement rod  or wire to make one

jimmillho

you need a piece of "piano wire" that is 0.025 inches in diameter. You should be able to find that at your local Hobby Shop or at a good hardware store.

You can download the instructions from Circuitron's web site for instructions on bending the wire.

Jim

tct855

Rick,
          I use K&S wire (of the proper tension for that particular switch) on the F&SM rr switches.  Go here! http://www.ksmetals.com/  Hope this helps!  Thanx Thom...

rick.geerts.3

Thanks guys I'm going to our local h.s. next weekend all pick them up thanks again

Powered by EzPortal