HO scale chainsaws 3d printed at shapeways.com. Also available in S and O scale.
Details, more pictures and drawings at this link.
http://nvrr49.blogspot.com/2015/05/chain-saws-ho-scale-3d-printed.html (http://nvrr49.blogspot.com/2015/05/chain-saws-ho-scale-3d-printed.html)
(https://modelersforum.com/proxy.php?request=http%3A%2F%2F2.bp.blogspot.com%2F-vY-BnNqeO78%2FVU9ris9heUI%2FAAAAAAAADv8%2FH6x61hrJy10%2Fs640%2FIMG_2716.JPG&hash=1ef5939e50a0280512f45e685292dd14f1085c30)
Kent, they ARE cute!
Just amazing
Thanx
Bob
Wow!
At first I thought that was one giant penny.
I bet they are tough to pull start ::)
Jaime
Do they make funnels that small? Getting gas in the saw must be a little tricksie as well. 8) 8)
They do look very nice and would be an excellent detail part.
Tom
Here is a set of Machine shop tools I had printed at Shapeways. Too many images to post them all here, but I have included a few. All the machinery is posted on my blog, but it took three posts, and I still don't have the building done yet.
Entry #1 Metal shaper and bandsaws, http://nvrr49.blogspot.com/2015/05/machine-shop-tools-3d-printed-metal.html (http://nvrr49.blogspot.com/2015/05/machine-shop-tools-3d-printed-metal.html)
#2 Metal Lathe, Vertical Mill and more, http://nvrr49.blogspot.com/2015/05/machine-shop-tools-2-3d-printed-large.html (http://nvrr49.blogspot.com/2015/05/machine-shop-tools-2-3d-printed-large.html)
#3 Horizontal Mill, Drill Presses and more, http://nvrr49.blogspot.com/2015/05/machine-shop-tools-3-3d-printed-surface.html (http://nvrr49.blogspot.com/2015/05/machine-shop-tools-3-3d-printed-surface.html)
(https://modelersforum.com/proxy.php?request=http%3A%2F%2F2.bp.blogspot.com%2F-pmosEx5zvuc%2FVVpnnP8lICI%2FAAAAAAAADzQ%2FBUUijCxz1xc%2Fs640%2FIMG_2785.JPG&hash=dd037a50fc9a6b89923956728022ded163a02760)
(https://modelersforum.com/proxy.php?request=http%3A%2F%2F4.bp.blogspot.com%2F-KzTXzrdt4x4%2FVWY5uUQ8tjI%2FAAAAAAAAD2Y%2FBh4CMtqHiEw%2Fs640%2FIMG_2747.JPG&hash=93ac2cd65cbf1b43f4369f8ed1ee61872805856e)
(https://modelersforum.com/proxy.php?request=http%3A%2F%2F3.bp.blogspot.com%2F-FRr51MgzKu8%2FVWY549j7szI%2FAAAAAAAAD2w%2FN9V3bjIx8OM%2Fs640%2FIMG_2775.JPG&hash=ea18d034c4ac33649b462717fec2926f388463b6)
Kent in KC
nvrr49.blogspot.com
Details I designed in HO scale for 3d printing. Most were printed at Shapeways.
More pictures and design details can be seen at: http://nvrr49.blogspot.com/2015/09/tire-shop-187-scale-3d-printed-details.html (http://nvrr49.blogspot.com/2015/09/tire-shop-187-scale-3d-printed-details.html)
(https://modelersforum.com/proxy.php?request=http%3A%2F%2F3.bp.blogspot.com%2F-FedK7pptNmg%2FVeOf9itBJOI%2FAAAAAAAAEBI%2FTr8TSmtZDhE%2Fs640%2FDA%252BVintage%252BTire%252BShop%252B016.JPG&hash=4e9ffd9aa0da7a16dcd798125d0bc7583b6c7515)
Jaws-of-Life, 3d printed at Shapeways in HO scale. More pictures and design details can be viewed at: http://nvrr49.blogspot.com/2015/06/jaws-of-life-3d-printed-in-ho-scale.html (http://nvrr49.blogspot.com/2015/06/jaws-of-life-3d-printed-in-ho-scale.html)
(https://modelersforum.com/proxy.php?request=http%3A%2F%2F2.bp.blogspot.com%2F-IMICdj25_Ng%2FVYWBwD5HDSI%2FAAAAAAAAD7U%2FlpmQN-6VXBM%2Fs640%2F031.JPG&hash=a519791886e365e7e3a60e7c1714447b210ed959)
Kent,
Great details. It seems the possibilities are endless.
Tom ;D
OK... Kent........
Where did you get the three inch diameter penny? ? ? ?
Or did you print that up too ? ? ?
Great stuff
thanx
Bob
I designed a selection of piano's in HO scale and had them printed at Shapeways. More pictures and diorama construction details can be viewed at: http://nvrr49.blogspot.com/2015/09/pianos-ho-scale-3d-printed-at.html (http://nvrr49.blogspot.com/2015/09/pianos-ho-scale-3d-printed-at.html)
(https://modelersforum.com/proxy.php?request=http%3A%2F%2F2.bp.blogspot.com%2F-eLnD_4pncwo%2FVgHYofUb4nI%2FAAAAAAAAEG8%2FT8eRZBVXlqM%2Fs640%2FPiano%252B2%252B016.JPG&hash=e0dee95a6243065f4c416ce265f0953f8592fc7b)
As a funny addendum to all these Shapeways printed items, every time I post something that I printed at Shapeways, and is therefore, available for sale on their web site for sale, on the Model Railroader forum, the administrator deletes the post. Since neither I nor Shapeways pays them any advertising at Kalmbach, they don't want their readers to know about products from non-advertisers.
And even funnier, they have contacted me to send them a proposal for a 3d printing article.
I designed some bath fixtures and had them print a long time ago, but they came out rather poor, so I redesigned them and had them reprinted. This time they came out well. More pictures, including painted ones, can be viewed at: http://nvrr49.blogspot.com/2015/10/bath-fixture-update-3d-printed-in-ho.html (http://nvrr49.blogspot.com/2015/10/bath-fixture-update-3d-printed-in-ho.html)
(https://modelersforum.com/proxy.php?request=http%3A%2F%2F1.bp.blogspot.com%2F-RtaY0r9Nvko%2FVew0itPD94I%2FAAAAAAAAEDs%2F1VvVI-bzyhE%2Fs640%2F025.JPG&hash=914c6e88f823213db2b2fbf4e66a7474162d8a87)
Kent,
Great stuff! Thanks for sharing.
Tom ;D
These are great.
Vintage travel trailers in HO scale. More details, drawings, etc at: http://nvrr49.blogspot.com/2015/12/travel-trailers-ho-scale-3d-printed.html (http://nvrr49.blogspot.com/2015/12/travel-trailers-ho-scale-3d-printed.html)
(https://modelersforum.com/proxy.php?request=http%3A%2F%2F1.bp.blogspot.com%2F-ILhspt340G4%2FVn1i5agkeeI%2FAAAAAAAAES4%2FraQWKwHas7o%2Fs1600%2F134.JPG&hash=0390e114a2476513aacf9f4953464aac7c33e4ff)
Kent,
The trailer is great!
Tom ;D
Very nice , very nice.
Here are some Gas Station details I designed and had printed at Shapeways. More details and pictures at this link, http://nvrr49.blogspot.com/2016/01/gas-station-details-3d-printed-shapeways.html (http://nvrr49.blogspot.com/2016/01/gas-station-details-3d-printed-shapeways.html)
(https://modelersforum.com/proxy.php?request=http%3A%2F%2F1.bp.blogspot.com%2F-r1skpd6OIzc%2FVn6dUrtwoDI%2FAAAAAAAAEU4%2FGyK6HTmv28I%2Fs1600%2F113.JPG&hash=f6d2784e7eea4cea93a71e14b263c02f4a4af6c6)