Recently baught 2 used toroise went to mount them and the throw rod is to short anybody know wer I can get a replacement rod or wire to make one
you need a piece of "piano wire" that is 0.025 inches in diameter. You should be able to find that at your local Hobby Shop or at a good hardware store.
You can download the instructions from Circuitron's web site for instructions on bending the wire.
Jim
Rick,
I use K&S wire (of the proper tension for that particular switch) on the F&SM rr switches. Go here! http://www.ksmetals.com/ Hope this helps! Thanx Thom...
Thanks guys I'm going to our local h.s. next weekend all pick them up thanks again