Print Page - Tylick Tool Bar Mills My build Challenge 2018

Title: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 07, 2018, 03:48:04 PM

Hi Alll:

I will be building Bar Mills Tylcik Tool Co. The top photo is of Jim Mooney Diorama. The 2nd photo is the one I built when the kit came out.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 07, 2018, 04:31:43 PM

Hi Guys:

Ok got the walls cut from their carriers and also mixed my paint 80% Signal Red and 20% Boxcar Red as per Frank Bernard.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: Mark Dalrymple on January 07, 2018, 05:00:26 PM

Nice choice, Karl - I'll be watching.

I might be wrong here - but I think I remember reading that a box car will not fit under the second story floor, and some foundation modification is called for if you decide to add a track and want to spot box cars here. Again - just something I think I remember but could be completely wrong!

Cheers, Mark.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: fbernard65 on January 07, 2018, 05:10:33 PM

Karl,

Looking forward to your build. Glad you are using the color combination that I originally did.

Frank

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: Janbouli on January 07, 2018, 05:20:09 PM

Following along Karl , looks like a neat kit.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: MASIGMON on January 07, 2018, 05:26:57 PM

Karl, I will be following along
Does this kit come with plastic windows

Mike Sigmon

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: JimMooney on January 07, 2018, 05:54:35 PM

not 'spose to red...it's CN17 gray...look at the box!

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: JimMooney on January 07, 2018, 06:07:58 PM

no plastic windows...
was looking at my original drawing and I measured a 40' box car I had and it shows 2" from top of rails to bottom of second floor and 1-1/2" wide

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: JimMooney on January 07, 2018, 06:10:05 PM

in color..

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: Raymo on January 07, 2018, 06:52:09 PM

Thanks for joining the challenge Karl. Can't wait to see this built at the end of this week... ;D ;D

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 08, 2018, 10:15:46 AM

Hi Mark:

Thanks for the input I will check that measurement out.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 08, 2018, 10:17:13 AM

Hi Mike:

No all windows & doors are laser cut.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 08, 2018, 10:18:05 AM

HI Frank:

Glad to have you aboard.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 08, 2018, 10:19:03 AM

Hi Jan:

Thanks for following along.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 08, 2018, 10:20:29 AM

Hi Raymo:

Thanks for following along. I doubt it will be done by the end of the week.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 08, 2018, 10:22:29 AM

Hi Jim:

Thanks for the measurements. I'm doing mine as I did before in red. Check the kit photos.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 08, 2018, 10:23:38 AM

Hi Guys:

The walls are stained with Floquil Driftwood stain. Yep I still actually have some.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: donatode on January 08, 2018, 11:50:11 AM

Karl, count me in as one of the following...

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 08, 2018, 04:11:27 PM

hey Donato:

Glad to have you aboard.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 08, 2018, 04:13:19 PM

Hi All:

Painted the walls red. Used thinner and paint to cause some of the gray underneath to show through. Was wondering if they look ok. Maybe I will finish a wall and see how it looks. However, am looking for opinions on how they look at this stage.

Thanks:

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: vinceg on January 08, 2018, 06:00:28 PM

I like the color but maybe a little bright? Some India ink wash would help, I think. But then, I'm a faded paint junkie.....

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: Janbouli on January 08, 2018, 06:10:35 PM

Wow , Karl bright red , now that's something we don't see from you every day. I'm quite confident you will get a bright red building to look great just like your normal green ones. ;)

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: ACL1504 on January 08, 2018, 06:28:25 PM

Karl,

Off to a great start and I also agree the red TO red. Maybe more of the Floquil Driftwood will help tone it down a bit.

I only have three bottles of Driftwood left. And, I'm working on the CD for you.

Tom ;D

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: S&S RR on January 08, 2018, 06:36:41 PM

Hi Karl

I just found your thread and you already have the walls painted. I agree with the comments so far. A little tone down may be in order. I have the same problem with yellow - it usually turns out to bright until I wash it with a tone down color. I will be following along.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: JimMooney on January 08, 2018, 08:11:58 PM

Holy Plasticville Batman! You better hose 'em down with some CN17 gray!!!!

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: JimMooney on January 08, 2018, 08:51:33 PM

Hey BTW
was looking at my files and finally found the plastic that almost fits in those holes...It's the ones from Graves Elevator...they're a little smaller though.
If you would be willing to burn those red walls (!) I'll cut you new batch with smaller holes and send you the plastic windows...(and acetate cut for them!)
this is a pic with new windows...

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: JimMooney on January 08, 2018, 08:53:40 PM

side by side comparison

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: engine909 on January 08, 2018, 10:10:52 PM

Just a note. I like the yellow leather dye from Angelus. 15349-1
ed

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: rpdylan on January 09, 2018, 02:16:33 AM

nice, will be following along. built this years ago but was thinking of a re- do to see if. could make it better,,,,,

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 09, 2018, 01:48:36 PM

Hi: Vince, Janbouli, Tom, John S, Jim Mooney, Ed & BobC:

Thank for the compliments and joining in on my build. It will be delayed for a few days as Jim is recutting the walls for me so I can use the plastic windows.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 10, 2018, 04:49:10 PM

Hi Guys:

Talked to Jim. The walls and windows are on the way.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: ACL1504 on January 10, 2018, 06:45:56 PM

Karl,

Jim got them done fast.

Tom ;D

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 11, 2018, 01:27:20 PM

Hi Tom:

Yeah they are on the way. I figure I should have them in a couple of more days. I will be changing the color of the walls from red to CN Gray as per Jim's suggestion.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 12, 2018, 04:36:17 PM

Hi guys:

New walls and windows arrived this afternoon. I'll back at this one tomorrow.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 15, 2018, 08:02:05 PM

Hi Guys:

Received new walls from Jim. Windows resized for the plastic windows. Color has been changed to CN gray per Jim's request. Corner trim is added. Walls are braced. Big sign is added, nail holes are done and A&I wash has been applied. On to the next step.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: S&S RR on January 15, 2018, 10:16:43 PM

Quote from: postalkarl on January 15, 2018, 08:02:05 PM
Hi Guys:

Received new walls from Jim. Windows resized for the plastic windows. Color has been changed to CN gray per Jim's request. Corner trim is added. Walls are braced. Big sign is added, nail holes are done and A&I wash has been applied. On to the next step.

Karl

Wow - you have been busy. Looks great - love the color.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 16, 2018, 05:07:56 PM

Hi John S:

Thanks appreciate your compliment and you following along.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 18, 2018, 05:25:14 PM

Hi Guys:

Got the walls, windows, doors, signs and shade done for the left hand building.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: PRR Modeler on January 18, 2018, 05:35:07 PM

Very nice modeling Karl.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: MASIGMON on January 19, 2018, 08:23:21 AM

Karl,
Jim might be right with the suggestion of CN Gray. CN Gray looks good with the sign. I do not know about you but I would rather use plastic windows in HO Scale

Can not wait for your next step

Mike Sigmon

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: JimMooney on January 19, 2018, 09:20:30 AM

yeah I gave it a quick glance and didn't think about it too much, then remembered it was the plastic windows. They look good, nearly identical..cool...

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 23, 2018, 05:02:50 PM

Hi All:

Made some progress in the last few day. Hope you like it. Here's a few pics.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: PRR Modeler on January 23, 2018, 05:04:00 PM

Great modeling. I love that huge sign.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 23, 2018, 05:27:02 PM

Hi curt:

Thanks buddy appreciate the compliment.

karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: Janbouli on January 23, 2018, 05:49:12 PM

I think Like is not the word Karl , love is better.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: sdrees on January 23, 2018, 09:22:07 PM

Karl,

hey Karl, it is looking good!

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: fbernard65 on January 23, 2018, 10:33:58 PM

Karl,

Looking good. Too bad the red did not work out for you. I really like how my model came out in the red. Here are some in process pics of my pilot build from 2004.

Frank

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 25, 2018, 02:40:57 PM

Hi Jan, Steve & Frank:

Thanks for the compliments. Much appreciated.

Karl.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 25, 2018, 02:41:59 PM

Hi Guys:

Here's a workbench shot of my progress.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: Jerry on January 25, 2018, 03:46:04 PM

Nice real nice!

Jerry

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: PRR Modeler on January 25, 2018, 04:53:46 PM

Great looking build.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 25, 2018, 05:00:39 PM

Hi Jerry & Curt:

Thanks much appreciate it.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: Mike Engler on January 25, 2018, 06:04:59 PM

Hey Karl- I just caught up with your adventure of the red walls and as always am enjoying your build. It is looking superb. I knew this looked familiar as I have one downstairs that might have been the second kit I ever built.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 25, 2018, 06:43:47 PM

Hi Mike:

Thanks for the compliment. The red wall versions is Frank Bernard's. Post a few pics of yours here. Love to see it.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on January 30, 2018, 05:22:43 PM

Hi Guys:

Got some more work done today. Rolled roofing has been applied to the roofs and painted SAC Bomber Green. The seams aren't showing in the photos but they are there. I think the light was to bright on the photo.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: jerryrbeach on January 30, 2018, 07:50:24 PM

Karl,
I just got caught up on this build. Looks great, as usual. I'm always in awe of how your colors compliment each other.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: PRR Modeler on January 30, 2018, 09:32:32 PM

Very nice job Karl.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 01, 2018, 05:15:13 PM

Hi Jerry & Curt:

thanks for the compliments. Much appreciated. Just finished up the roof on the right building. It is painted SAC Bomber Green, A&I wash with gray dry-brushing. stack has been painted Railbrown with its silver showing through. Tar is Apple Barrel Pavement Black. I dipped the stack in it and put it on the roof. Result very nicely shaped tar around the bottom.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 05, 2018, 03:36:41 PM

Hi Guys:

Got A little more work done today. Left main roof is on painted and weathered. Also glued the two buildings together. On to the traveling crane when all is dry. Hope she looks OK.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: Janbouli on February 05, 2018, 04:37:34 PM

Looks great Karl, I always wonder if it's the way you take photo's that make your builds look so tidy, with the immaculate white backdrop and such.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: ACL1504 on February 05, 2018, 05:48:56 PM

Karl,

Yes, what Jan said and I'll add, just perfect.

Tom ;D

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: PRR Modeler on February 05, 2018, 06:20:36 PM

Excellent modeling, really top notch.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: donatode on February 05, 2018, 07:57:12 PM

Quote from: ACL1504 on February 05, 2018, 05:48:56 PM
Karl,

Yes, what Jan said and I'll add, just perfect.

Tom ;D

I'm lost for words...so I'll just parrot....
(https://i.ytimg.com/vi/UtBQrBLsTQY/hqdefault.jpg)

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 08, 2018, 01:06:59 PM

Hi Jan, Tom, Curt and Donato:

thanks for the compliments as always. Dormers and the crane are added.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: sdrees on February 08, 2018, 02:40:21 PM

Looking good Karl, vey nice.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: Mark Dalrymple on February 08, 2018, 05:03:11 PM

Looks great, Karl.

Thanks for sharing.

Cheers, Mark.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 09, 2018, 07:21:10 AM

Hi Steve & Mark:

Thanks for the compliments. Much apprecaited as aleways.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: jerryrbeach on February 09, 2018, 09:15:28 AM

Karl,
I have always liked this kit, and as usual, you are doing an outstanding job!

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 09, 2018, 04:25:43 PM

Hi Jerry:

Thanks for the compliment. Here's a photo of the awnings installed.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: MASIGMON on February 09, 2018, 04:59:34 PM

Karl,
I have to admit the structure looks fantastic in gray.
Just a question
In HO Scale are you glad that you were able to do the windows in plastic?
I know why some of the kit MFG do laser however I for one at age 69 would far rather build a kit in plastic
I guess that is one reason I like FOS & FSM & CCK & I am sure there are other kit MFG that also do plastic.
Doors are not that bad however sometimes some laser cut doors to me look a little out of scale in thickness

Mike Sigmon

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: PRR Modeler on February 09, 2018, 05:31:58 PM

Great looking build Karl.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: S&S RR on February 09, 2018, 10:04:04 PM

Karl

Another great build. Fantastic!

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 10, 2018, 09:23:49 AM

Hi Mike:

Yeah I prefer the plastic windows over laser cut also. I have 17 days left as a 69 year old. These widows are the ones Bar Mills had made for this kit. Jim Mooney sent them to me.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 10, 2018, 09:24:52 AM

Hi Curt and John:

Thanks for the compliments. I appreciate it as always.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: Jerry on February 10, 2018, 10:06:27 AM

Hi Karl

That is a fine looking build you have there.

Great coloring and weathering. Nice work on all the little details that you had put on awnings etc.

Jerry

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: GPdemayo on February 10, 2018, 10:40:26 AM

Neat structures Karl.....can't wait to see it when you add the scenery & details. 8)

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 10, 2018, 11:16:07 AM

Hi Greg:

Thanks for the compliment. I'm getting there.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: donatode on February 10, 2018, 04:02:55 PM

Karl....I think you're already there!! Nice Job....

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: MASIGMON on February 11, 2018, 10:06:07 AM

Karl,
The CN Gray paint job is almost perfect
If you brush painted do you thin the paint any or did you air brush on the paint
Been studying the last photo & love the build

Mike Sigmon

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 12, 2018, 11:47:02 AM

Hi Jerry, John S., Donato, And Mike:

Thanks for the great compliments Much apreciated.

Mike:-----Walls are brush painted with full strength paint from the bottle, the A&I & dry-brushed with antique white.

Thanks: Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 18, 2018, 01:30:07 PM

Hi Guys:

Haven't got much done as my work room is torn apart having a new outside door installed. Also had a tooth pulled and it is also not going well.

Here's a photo of my last bit of progress. Hope to get back to this by Tuesday.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: MASIGMON on February 19, 2018, 09:57:27 PM

Karl, Forgot to thank you for how you painted the structure

Mike SIgmon

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 22, 2018, 12:56:33 PM

Hi guys:

Well the new door in my workshop is finished. I got back to the model and finished up the structure. Castings and the front foundation under the left building have been added. Nex is to put it on A diorama.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: bparrish on February 22, 2018, 06:17:24 PM

Karl...

Great build......

Thanx
Bob

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 22, 2018, 06:51:51 PM

Hi Bob:

Thanks appreciate the compliment.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: jerryrbeach on February 23, 2018, 08:18:12 AM

Karl,

Another great build. I especially like the way you tied it all together with the chalking/weathering of the roofing and siding.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: cuse on February 24, 2018, 08:16:59 AM

Beautifully done Karl. You nailed the colors and weathering as usual!

John

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 24, 2018, 10:57:12 AM

Hi John:

thanks for the compliment. Much appreciated as always.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 27, 2018, 04:45:47 PM

Hi Guys:

been working on the extra detail. The shed, billboard and fences.

Here's a photo. On to the diorama.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: ACL1504 on February 27, 2018, 06:42:06 PM

Karl,

Wonderful build.

HAPPY BIRTHDAY MY FRIEND

Tom

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on February 28, 2018, 07:59:02 AM

Hi Tom;

Thanks buddy appreciate your compliment. Thanks for the birthday wish.

karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: donatode on February 28, 2018, 02:09:09 PM

I am conflicted on what to say first....Happy Birthday or Wonderful bild.....

I'll let you know when I decide....

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on March 01, 2018, 03:04:40 PM

Hi Guys:

Been working on the diorama. Here's a photo of my progress so far.

karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: sdrees on March 01, 2018, 09:40:59 PM

Looking good Karl, keep up the good work.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on March 02, 2018, 06:14:44 AM

Hi Steve:

Thanks buddy appreciate it.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on March 03, 2018, 02:44:06 PM

Hi Guys:

Finished up this one today. Here's the final photos.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: vinceg on March 03, 2018, 03:19:30 PM

Quote from: postalkarl on March 03, 2018, 02:44:06 PM
Hi Guys:

Finished up this one today. Here's the final photos.

Karl

Very nice scene, Karl. Looks excellent.

Vince

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: PRR Modeler on March 03, 2018, 03:54:05 PM

Very nicely done Karl.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: Janbouli on March 03, 2018, 05:56:44 PM

Once again , thank you Karl for sharing a great scene.

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: GPdemayo on March 04, 2018, 12:51:56 PM

Really came together well Karl.....great work..... 8)

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on March 04, 2018, 01:20:33 PM

Hi Vince, Curt, Jan And Greg:

Thanks for all the great compliments. Much appreciate. On to the next project. Just have to decide what it is.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: Zephyrus52246 on March 05, 2018, 07:39:44 AM

Nice structure and diorama, Karl. As usual. :)

Jeff

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: postalkarl on March 05, 2018, 08:05:55 AM

Hi Jeff:

Thanks buddy appreciate it.

Karl

Title: Re: Tylick Tool Bar Mills My build Challenge 2018
Post by: Lynnb on March 21, 2018, 12:29:01 AM

Looks great Karl, I really like the color you used on the structures.

The Modeler's Forum

The Mainline => Kit Building => Topic started by: postalkarl on January 07, 2018, 03:48:04 PM