I wanted to step my game up a bit with a larger kit so I'm breaking out this ebay find. The Fine Scale Miniatures Logging Repair shed. This will be my 4th kit, but first diorama.
I want to accomplish a few things with this build:
1. Build and decorate a diorama base
2. Add interior and exterior lighting
3. Hand lay track
4. Learn how to paint and weather metal castings
Pretty ambitious but I'm looking forward to it. I'll be using updated tricks outlined in some of my sierra west kits by Brett Gallant in regards to weathering the strip wood, and dealing with the castings.
Here we go
(https://i.imgur.com/3kFXdTL.jpg)
I'll be looking in.....have fun with the hand laid track - you'll love the results. :)
I built this kit decades ago when it first came out.
It's a great kit and should make a great diorama.
I don't know what you are using as a diorama base but I now use only the 1 inch thick foam from Home Depot or Lowes. The blue stuff or the pink stuff.
If this is to be a freestanding diorama that will not be used on a layout, you may want to make the base 2 inches thick and have it drop off drastically on one corner.
I saw a version which did that on the lower left hand corner of the photo on the box. That outhouse was sort of built to extend over the drop off so they did not need to dig a cesspool under the outhouse. All the waste just dropped down onto the area below. It made for an interesting scene.
One big advantage of the blue foam is that you can make the diorama larger to start with and cut it down to a smaller size later if you need to do so.
If you go to the Bar Mills Models website and look at their videos where they have built a model into a diorama for trade shows, you can get some good ideas.
At the time this kit was made the blue foam sheets were not available, or at least I did not know about them.
They are so much better than plywood and they never warp and are always light weight. Plus you can plant trees on the blue foam easily.
Have fun and I will be following along to see your progress.
Darryl
I'll be following along. Interesting looking kit.
The FSM kits have very complete and helpful instructions. I think you'll do a great job.
Hand laying track takes time, but I found it tremendously satisfying work, and the results can be fantastic. I need to do some more of it on my current layout.
With regard to painting the castings--George Sellios recommends specific colors and brands of paint, which are no longer available. Give all the castings a good washing, let dry, then a coat of primer. Once primed and dry, you should get good results from just about any enamels or acrylics.
--George
A good choice for spray primer is the khaki/tan "camouflage" color. That's reasonably close to the "Driftwood" Floquil stain and "Earth" Floquil paint color.
https://www.rustoleum.com/product-catalog/consumer-brands/specialty/camouflage-spray/
dave
Thanks for all the advice and ideas so far.
I took some time to read over the instructions last night, and the assembly looks pretty straight forward. Since the kit seems a little short, I ordered some extra lumber to lengthen the front of the shop about a half length. Hopefully I'll have it all in this weekend so I can begin treating the wood along with the glass sheet so I can start on the first template after the frame lumber painting is done.
You'll love the FSM kits.
Buy you a jig from Fast Tracks for hand laying track. It makes it soooooo easy and lots of fun. Their website has all you need to get started.
https://www.handlaidtrack.com
Jaime
Better late than never:
(https://i.imgur.com/8euM02z.jpg?1)
Got bogged down looking for a new job so this got put on the back burner.
Slappin' the walls together
(https://i.imgur.com/HvJpqbr.jpg)
(https://i.imgur.com/VfS8j6t.jpg?1)
Hey Pain train:
I'm following along. Looking good so far.
Karl
Beautiful wood graining and coloring on that scale lumber. Nice job.
--Opa George
I agree with George, very nicely weathered boards.
Tom ;D
Thanks. I was really happy with the way they turned out. I filled a mug with about half water then added about 5 drops of black acrylic paint and painted both sides. I repeated the process with tan but only applied to one side for a lighter interior appearance. Took about a day to dry for each application.
Thanks for explaining how you got the really nice stain on your wood. Construction is looking good so far.
Nice job staining the wood. It's a great craftsman kit to start with.
Tommy
Nothing beats board by board. Nice job.
ed
Well done so far.
hey Paintrain:
I agree with Tom the stain looks great. I'm following along. Always enjoy FSM builds.
Karl
You have a nice start on the Sawmill, the 170 Sawmill was my first ever fsm kit , this is a nice kit as well.
Thanks for the props
Lets see how your sawmill turned out, Lynnb. I've got the old time saw mill and barnstead lumber in the pile as well. and a mountain of sierra west kits. Speaking of, it's time to start doing the window casting for the walls so I ordered the materials for that based off Brett's instructions. Should be here in a few weeks.
(https://i.imgur.com/j1V2UVR.jpg)
(https://i.imgur.com/Y32mjKq.jpg)
Here's my 170 Sawmill, its gotten beat up a bit since tearing down the last layout, needs a couple repairs.
You're doing a great job on your build.
Beautifully elaborate woodwork. The subtleties in the stain are very well done and effective.
--Opa George
Great job so far.
It looks like your templates are under a fairly thick glass work surface. One suggestion I'd give is to get a cheap photo copier and some double sided tape. Make a copy of the templates and use the tape to secure the wood directly to the template. It's much easier, more precise and faster. With the copier you can make multiple sheets so you can work several sub-assemblies at the same time.
Just a suggestion.
Thanks for the replies. No updates since right after I got back into the kit, I ended up with a new job 1000 miles away. I'm getting settled in and should be back to building soon. I also noticed I used the wrong elmer's wood glue, so I'll have to spot check it with the water proof variety when I get a chance.
Steve, thanks for that idea. I'm going to try it out for the remainder of the build.
Wowe , I just realized this is the Logging Repair Shed and not the FSM SawMill , my apologies. What was I thinking. :-[
Hey Lynn:
Looks just beautiful so far. Keep the pics flowing.
Karl
Lynn, great looking wood there. Look forward to more progress.
Horton M.
Looking forward to following along, can't wait till I attempt a build like this. I appreciate you sharing.
-Steven
Knocked out about half the castings over the weekend. Definitely use nicer acrylic paint for those since the cheap hobby paints don't seem to want to stick to the finer metal detail even when cleaned and primed.
Is there a real advantage over burnishing the metal vs priming?
Nice work so far, PT.
Looks like you'll have lots of fun. I agree - it might be fun to add some elevation changes to your list of goals.
Cheers, Mark.