The Modeler's Forum

The Mainline => Kit Building => Topic started by: Zephyrus52246 on January 11, 2021, 03:35:01 PM

Title: Build challenge 2021, Bar Mills billboard.
Post by: Zephyrus52246 on January 11, 2021, 03:35:01 PM
I needed a sign for the side of the Addams avenue structure.  I have several of these Bar Mills Billboards, I don't think they make them anymore, and thought I'd use one.  It's my favorite for "Doctor Recommended" cigarettes.  Gotta keep that waiting room full.


Jeff
Title: Re: Build challenge 2021, Bar Mills billboard.
Post by: Zephyrus52246 on January 11, 2021, 03:38:06 PM
Pretty basic stuff here.  Billboard back, edge with letters on top.  Matching separate letters piece, three struts for the back, a front plank and the sign itself and instructions.  Two small light shades and a piece of wire as well, but I didn't use these, as the curved track is going to pass pretty close to the edge of the structure and I don't want rolling stock hitting them. 


Jeff
Title: Re: Build challenge 2021, Bar Mills billboard.
Post by: Zephyrus52246 on January 11, 2021, 03:40:16 PM
I separated all the pieces.  Spray painted black the back of the billboard (the front has self stick adhesive) , as well as the edge piece and all the wood pieces.  The front letters were spray painted white. 


Jeff
Title: Re: Build challenge 2021, Bar Mills billboard.
Post by: Zephyrus52246 on January 11, 2021, 03:41:21 PM
The main challenge is cutting the sign out, the bottom edge extends beyond the "rectangle".  I used the outside "frame" piece as a guide to cutting this out. 


Jeff
Title: Re: Build challenge 2021, Bar Mills billboard.
Post by: Zephyrus52246 on January 11, 2021, 03:43:11 PM
Sign affixed.  Front frame put on.  Of course, now there's a white edge of the paper which can be seen, so this was touched up with black paint.  Entire sign and edges, etc weathered with some grey pastels.  White letters applied.  Frame built and voila!  Sign attached to the side of the structure.  Hard to believe I could build something in two days. 

Jeff
Title: Re: Build challenge 2021, Bar Mills billboard.
Post by: NEMMRRC on January 11, 2021, 06:32:29 PM
Luxurious


Jaime
Title: Re: Build challenge 2021, Bar Mills billboard.
Post by: ReadingBob on January 12, 2021, 07:37:14 AM
That's a great looking billboard! 

This reminds me of a scene early on in the movie "The Monuments Men" where an Army Doctor is shown using his stethoscope to exam an inductee.  Both are smoking and the Doctor is coughing.   :o  :)
Title: Re: Build challenge 2021, Bar Mills billboard.
Post by: Opa George on January 15, 2021, 05:20:36 PM
Wonderful effect--a really nice detail that adds so much character.  Very cool, Jeff.
--Opa George
Title: Re: Build challenge 2021, Bar Mills billboard.
Post by: Zephyrus52246 on January 15, 2021, 08:24:38 PM
Thanks for looking in, Jaime.


Jeff
Title: Re: Build challenge 2021, Bar Mills billboard.
Post by: Zephyrus52246 on January 15, 2021, 08:26:00 PM
Bob, when I started here in private practice in '86, all the general surgeons, urologists and a couple of the gynecologists at the community hospital smoked.  You'd think they'd have known better.


Jeff
Title: Re: Build challenge 2021, Bar Mills billboard.
Post by: Zephyrus52246 on January 15, 2021, 08:27:40 PM
Thanks, Opa George.  I think it's perfect to bring some life to a otherwise bland wall.

Jeff