Tom Wilson's mention of using a Cricut machine to do his building reminded me of the yearly Challenge Build that started the New Year and ended Tax Day, April 15th on the Railroad Line Forum. I had picked to do a scratch build project from the list of subjects. A sketch was done by a member, Frederic Testard. Another member used the sketch to make up drawings. He was kind enough to send me a set for my HOn30 quarry line to service the electric locomotives. I used a router/engraver CNC for a part of the structure that used a Cricut cutter holder. I did use a milling cutter to do some of the cutting. Before I got the Comgrow Robo router/engraver CNC I was looking at the Cricut. What I didn't like was that the software is Cloud based and you needed to be connected to the internet to use the software. A big turn-off for me in using CNC machines at home.
Fredrick's Sketch of the Critter Shed
(https://kingstonemodelworks.com/HOn30QRR/FredericBuilding.jpg)
In that set of plans there where two sheds with different dimensions. Plan "A" was a small version. Plan "B" was the larger version.
(https://kingstonemodelworks.com/HOn30QRR/footprint.png)
And George's drawings of the critter shed.
(https://kingstonemodelworks.com/HOn30QRR/FredericBuilding2.jpg)
I redrew the drawings from George's larger version in CAD because I needed a DXF file for the CAM program. Once all that prework was done it was time to fire up the ROBO router and have at it.
I had built a rock bin from Plexiglas and I wanted to experiment with thinner Plexiglas. I had found some .120" thick Plexiglas I had laying around. I also had some .062" 3 ply Birch plywood. So, I'm making two critter sheds.
(https://kingstonemodelworks.com/HOn30QRR/cs-1.JPG)
The walls of the engine shed came first.
(http://the%20walls%20of%20the%20engine%20shed%20came%20first.)
Here I'm trying a technique I've seen on U-tube that guys use to hold things together. It's double-sided tape. I put a couple of strips down on the plywood, then peeled off the backing and placed it on the machine table.
(https://kingstonemodelworks.com/HOn30QRR/cs-3.JPG)
This is what it looks like with the backing pulled off.
(https://kingstonemodelworks.com/HOn30QRR/cs-4.JPG)
Next it is placed on the machine bed and the machine is homed and the "start button" is pushed.
(https://kingstonemodelworks.com/HOn30QRR/cs-5.JPG)
One wall done.
(https://kingstonemodelworks.com/HOn30QRR/cs-6.JPG)
One minor mistake and one major "could have been disastrous" mistake. The mistake is the window. Apparently, I didn't set the depth of cut right for the tabs on that particular window. More on this later. The "almost disastrous" is when the door was cut through. It came out and it got caught between the cutter and one of the sides. Those were a few seconds of pants pooping excitement. Luckily, it didn't break the cutter.
(https://kingstonemodelworks.com/HOn30QRR/cs-7.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-8.JPG)
And 12 minutes later it's done. Now comes the fun part. Getting the parts off. I've never used double sided tape of this nature before. it's used to hold carpets down and boy does it stick to anything you apply it to. It was a major battle getting the parts off.
(https://kingstonemodelworks.com/HOn30QRR/cs-9.JPG)
Next came the harrowing experience of removing the larger part of the sheet leaving the cut-out parts till last. I've never worked with such tenacious tape in my life. I now understand why one video I watched the guy swore he'd never use double sided tape again. There is another method to use that makes the use of painter's tape and CA glue with a hardening accelerator. I'll use that sometime in the future.
Here I'm carefully getting underneath the part to pry up the finished parts.
(https://kingstonemodelworks.com/HOn30QRR/cs-10.JPG)
And here's the major disadvantage to using such sticky tape. Thin sections can get easily get broken trying to get them un-stuck. That part of the wall got broken off. It'll be glued back together again during assembly of all the walls.
(https://kingstonemodelworks.com/HOn30QRR/cs-11.JPG)
Pulling this stuff was no fun.
(https://kingstonemodelworks.com/HOn30QRR/cs-12.JPG)
The red arrows point to the "tabs" that were supposed to be left on the parts so they would not come flying out when cut through. Chalk that one up to "programmer error". Same goes for the window in the red square. The proper height for the tabs was not set correctly.
(https://kingstonemodelworks.com/HOn30QRR/cs-13.JPG)
Next up was the Plexiglas version of the walls. Here it the first cut. A couple of seconds after I took the picture the cutter went "Bing". Yup, broke the cutter.
(https://kingstonemodelworks.com/HOn30QRR/cs-14.JPG)
Third cutter was the charm.
(https://kingstonemodelworks.com/HOn30QRR/cs-15.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-16.JPG)
All done. Those two cutters gave up their lives for the test run on Plexiglas on the ROBO router. I discovered that I was running the machine to slow. It did well at 8000 cutter RPM and 4 inches a minute feed rate. It sounded like the machine was going to blow up any minute. I expected the cutter to break at any moment too. This was pants pooping times two. It made it through. Now came the task of pulling the parts off the table. Yup, going to try the painter tape and CA glue the next time around.
A quick tape job using painters' tape to see what the finished engine shed part of the critter shed looks like.
(https://kingstonemodelworks.com/HOn30QRR/cs-17.JPG)
That's it for now. More to come tomorrow night. I also have to find my pictures of the Cricut Kinfe holder I made for the Robo engraver/router.
Bernd
Looks good Bernd. You've still got all those fancy tools.
I remember that sketch that Frederic did. Old RRL forum memories.
Quote from: robert goslin on September 21, 2026, 05:31:18 PMLooks good Bernd.
Thanks Rob. Much appreciated.
QuoteYou've still got all those fancy tools.
I don't consider them fancy. To me they are just the tiny brother of the CNC machines I got to work on during my machine tool career. As a matter of fact I'm looking at adding a fourth one. My financier called this week and told me I had $10,000.00 coming my way. Nice to be at that age were the government says you need take out money from your 401K.
I've been looking at the Makera Carvera and the Makera Carvera Air. The Carvera has an automatic tool changer where the Carvera Air is a manual tool changer. There is a fourth axis and it can do PCB boards, something I did also for model railroad items by hand. Plus it has a laser module for doing engravings. Among other things you can cut all sorts of non-ferrous metal, plastics, wood, resins and steel. Much more versatile than just a plain laser or a 3D printer due to the fact it can cut so many different types of material.
https://www.makera.com/products/carvera?variant=47673536086241 (https://www.makera.com/products/carvera?variant=47673536086241)
QuoteI remember that sketch that Frederic did. Old RRL forum memories.
It was just the thing I was looking for on the quarry line.
More pics later tonight.
Bernd
I thought I posted this the other day. Must have clicked the wrong button. Anyway,
Like Norm Abrams always says, quote "Time for a little assembly."
Starting to assemble the pieces the router cutout. I set up the magnetic assembly board, magnets and 1-2-3 blocks and a machinist vise to keep everything square.
(https://kingstonemodelworks.com/HOn30QRR/cs-47.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-48.JPG)
Next time somebody says you can't glue Plexiglas to steal with liquid glue, show them this picture. It removed easily by using an X-Acto flat blade knife.
(https://kingstonemodelworks.com/HOn30QRR/cs-49.JPG)
All done. A nice version of the critter shed, only mirrored. Yup, I screwed up in assembling it. It'll still work. I just have to remember to do it right on the plywood version.
(https://kingstonemodelworks.com/HOn30QRR/cs-50.JPG)
Yup, it was Friday the 13th when I did this and I'm sticking to that answer.
(https://kingstonemodelworks.com/HOn30QRR/cs-50A.jpg)
Up next is the plywood version of the shed. Hope I don't do that one mirrored either.
Until next time.
Bernd
Bernd,
It appears to me that you have gotten this down to a science!
There's nothing you can't make with your special machines, and
I will remain in your viewing section. I wish to continue
following to see what you can come up with next. Carry on!
Rich
Quote from: Pennman on October 01, 2026, 12:26:53 AMBernd,
It appears to me that you have gotten this down to a science!
There's nothing you can't make with your special machines, and
I will remain in your viewing section. I wish to continue
following to see what you can come up with next. Carry on!
Rich
A science you say. Well as I've always said it all came from my years of growing up and being exposed to machines to make things both in wood and metal.
Thanks for the nice words Rich. I'm always amazed at your techniques of building structures from scratch and getting the proportions right, plus the weathering.
Bernd
Moving right along with the start of the plywood assembly. Just like on the Plexiglas version, the openings needed the corners squared.
(https://kingstonemodelworks.com/HOn30QRR/cs-51.JPG)
Test fitting some Tichy windows I had on hand.
(https://kingstonemodelworks.com/HOn30QRR/cs-52.JPG)
Assembling the walls using magnets, 1-2-3 blocks and a machinist vice. For me this works better than clamps or rubber bands.
(https://kingstonemodelworks.com/HOn30QRR/cs-53.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-54.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-55.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-56.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-57.JPG)
And while I was gluing the walls together the ROBO CNC machine was busy cutting the siding into 12" wide by 3" thick HO scale boards. The material being cut is 1/32" thick balsa. I'm using a Cricut cutter in a homemade adapter for this machine.
(https://kingstonemodelworks.com/HOn30QRR/cs-58.JPG)
Out of 59 boards total I got one that's 9 HO inches wide at the end of the cut. I need to be a better draftsman on the CAD.
(https://kingstonemodelworks.com/HOn30QRR/cs-59.JPG)
Cutting off the uncut part. BTW, that Kermit (Frog) Tape works great for this kind of work.
(https://kingstonemodelworks.com/HOn30QRR/cs-60.JPG)
And 58 HO scale 12" wide board and HO scale 9" wide board.
(https://kingstonemodelworks.com/HOn30QRR/cs-61.JPG)
The semi-finished critter shed. I made the lean-to a bit wider and I moved it back from the door 6' scale HO feet.
(https://kingstonemodelworks.com/HOn30QRR/cs-62.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-63.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-64.JPG)
A comparison between the drawing and what I built. The lean-to was made wider.
(https://kingstonemodelworks.com/HOn30QRR/cs-64A.jpg)
This will be approximately where the shed will be located on the quarry line. Details to be worked out yet.
(https://kingstonemodelworks.com/HOn30QRR/cs-65.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-66.JPG)
The master mechanic is a little perturbed at the builder for not making it bigger to get the Twins in for service.
(https://kingstonemodelworks.com/HOn30QRR/cs-67.JPG)
Same for the electrics. Looks like a mod is needed, but I'll save that for the Plexiglas version at the transfer facilities.
(https://kingstonemodelworks.com/HOn30QRR/cs-68.JPG)
At least they can get the railtruck in there for maintenance. Might be a little cramped, but..............
(https://kingstonemodelworks.com/HOn30QRR/cs-68A.JPG)
Maybe a shop complex? Naw!
(https://kingstonemodelworks.com/HOn30QRR/cs-69.JPG)
Next will be the staining of the wood and gluing the boards to the side of the main building. The lean-to will need clapboard siding. Looks like another job for the ROBO.
Until then, that's it.
Bernd
For my laser learning project, I cut clapboards from cardstock. Turns out that cardstock was way too thick. So the result looks kinda funky, but as I said, it's a 'learning' project.
dave
Very well done Bernd. And thanks for the nice tutorial on how you did it.
Jerry
It's always a fun time to watch the Master at work.
Quote from: deemery on October 01, 2026, 09:42:23 AMFor my laser learning project, I cut clapboards from cardstock. Turns out that cardstock was way too thick. So the result looks kinda funky, but as I said, it's a 'learning' project.
dave
If you think about it, how thick is clapboard? Perhaps 1/2" if that. That would be close to .006" of an inch thick for HO scale. Might as well use plain writing paper then. In my next update I show what I used for the clapboard.
Quote from: Jerry on October 01, 2026, 11:14:39 AMVery well done Bernd. And thanks for the nice tutorial on how you did it.
Jerry
There's lots more that got me to this point in the construction. Thanks for the nice comment.
Quote from: KentuckySouthern on October 01, 2026, 04:51:26 PMIt's always a fun time to watch the Master at work.
Thanks Karl. Much appreciated. More to come.
Bernd
"Thanks for the nice words Rich. I'm always amazed at your techniques of building structures from scratch and getting the proportions right, plus the weathering.
Bernd"
Hey Bernd, Thank you very much for your comment! But, Hey, your version of getting from A to B isn't
shabby either. At least your vision without plans looks mighty fine to me. I'm sure you can re-do
those structures to be able to get them inside for their required service. ;D I'll be watching!
Rich
Continuing on. I started staining and painting(?) on the model. Not an aspect of modeling I'm very good at. I need more practice. Although I did learn to get the paint on before assembly from the forum members. Leaves sharper contrasts between different colors.
So I first diluted some leather dye with denatured alcohol to a thin wash and gave the balsa a coat of that.
(https://kingstonemodelworks.com/HOn30QRR/cs-70.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-71.JPG)
I let that dry a bit and then made a wash of fire engine red acrylic craft paint and water and did a wash with that.
(https://kingstonemodelworks.com/HOn30QRR/cs-72.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-73.JPG)
Started to add the siding to the Plexiglas structure first. I used the double-sided transfer tape to attach the balsa boards which had worked well on the upper part of the crusher building I was doing at some point and is still holding. Next will be the plywood shed. The windows will be cut out when both structures have their walls completed. For some reason the red is a lot brighter on the model than when viewed in person. Must be the lighting I'm using. The brightness will be taken care of once I get to do some weathering on the buildings.
(https://kingstonemodelworks.com/HOn30QRR/cs-74.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-75.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-76.JPG)
Ok, this finishes the vertical board sheathing on the main buildings. Up next is the clapboard siding on the lean-to portion of the building.
Picture of both Plexiglas and plywood versions.
(https://kingstonemodelworks.com/HOn30QRR/cs-79.JPG)
The transfer adhesive worked pretty good. I tried two methods. One applying the transfer tape to the building and then adding the individual boards and applying the transfer adhesive to the individual boards. The best method seems to be to apply it to the whole building and then apply the boards. With some of the left over boards I applied them to a separate piece of plywood and did a little weathering. That red really needs to be toned down a bit.
After I got the vertical boards done on the main building I had some left over and glued them to a piece of plywood to see if I could tone down that bright red. Here's the result after just a bit of practice. I also used a fine wire brush to make it a little grainy looking. I think I've got it, at least for now.
(https://kingstonemodelworks.com/HOn30QRR/cs-82.JPG)
I think for the clapboard siding on the lean-to I'm going to use some heavy construction paper and the transfer adhesive. So far it's working out pretty good.
That's it for now.
Bernd
Bernd,
Everything looks like it will be done soon and with a fine touch.
Nice work on adding the boards.
Rich
Quote from: Pennman on October 02, 2026, 01:09:57 PMBernd,
Everything looks like it will be done soon and with a fine touch.
Nice work on adding the boards.
Rich
It's been several years since I built that. I had posted it on the Railroad Line forum as build challenge. Still haven't finished the sheds. New shiny objects keep attracting my attention away from finishing the project. :o ??? :o
Bernd
Up next is the clapboard siding on the lean-to.
I used the ROBO to cut out the clapboard. I used a heavy grade of craft paper. I forgot to take a picture of it. Somebody had mentioned it on the forum. I got it at Wally World. It's called Neenhah - creative Collection. It's 65lb paper. Mics out to be 3/4" thick in HO scale or .009" thick. I used a tan sheet and applied the transfer adhesive to the back. The adhesive is the lighter tan color.
(https://kingstonemodelworks.com/HOn30QRR/cs-83.JPG)
It was taped to some chip board and that in turn was taped to the machines table. Here's the first pass, which didn't cut deep enough. Operator error for not setting the knife deep enough for one single cut.
(https://kingstonemodelworks.com/HOn30QRR/cs-84.JPG)
Third pass with the cutter reset to cut .030" deep. Didn't realize how much flex was in the chip board and craft paper taped together.
(https://kingstonemodelworks.com/HOn30QRR/cs-85.JPG)
And there we have it. 30 pieces of 3/4" thick HO scale clap boards.
(https://kingstonemodelworks.com/HOn30QRR/cs-86.JPG)
No comes the fun part. Getting the strips lined up perfect on the model. I don't know which worked best. Drawing the lines on the building and then adding the strips or trying to measure each one 6 HO scale inches up. When I do this type of operation again I'm going have to figure out away to place the strips on the building better.
(https://kingstonemodelworks.com/HOn30QRR/cs-87.JPG)
I measured as shown in the previous photo and then drew a pencil line.
(https://kingstonemodelworks.com/HOn30QRR/cs-88.JPG)
Got a rough idea of how long a piece I needed and cut it to oversize length so it can be trimmed flush at the ends.
(https://kingstonemodelworks.com/HOn30QRR/cs-89.JPG)
Here comes the funner part. Getting the backing of the transfer tape without getting it stuck to me. Tweezers work great for such small parts.
(https://kingstonemodelworks.com/HOn30QRR/cs-90.JPG)
The next fun part was getting it lined up correctly before the adhesive grabed hold of a finger or the building.
(https://kingstonemodelworks.com/HOn30QRR/cs-91.JPG)
And after a couple of hours of relaxed fun one wall is done. Two more to go. The last wall stays blank as it gets glued to the main building.
(https://kingstonemodelworks.com/HOn30QRR/cs-93.JPG)
That's it for this post. Until next time.
Bernd
Troels Kirk would be proud of you for using paper that way. It came out nice!
dave
Quote from: deemery on October 03, 2026, 08:50:59 AMTroels Kirk would be proud of you for using paper that way. It came out nice!
dave
Thanks Dave.
Moving right along.
I've got the plywood version all sheathed up and the windows cut out. Next time I'm going to cut out the windows as I apply the siding instead of after it's all installed. Much easier that way.
To finish off the other two walls of the lean-to on the plywood version I used a modelers suggestion of affixing a paper templet of the spacing. I use 9" lines I drew up in CAD and then printer out on the laser printer. I did a quick test with some short pieces for spacing the clapboards.
(https://kingstonemodelworks.com/HOn30QRR/cs-94.JPG)
Added the transfer adhesive to the back and stuck them to the wall after the first clap board was stuck to the wall. Much easier than trying to measure with a 12" long HO scale ruler.
(https://kingstonemodelworks.com/HOn30QRR/cs-95.JPG)
Gave it the red acrylic thinned paint job. Amazing how the brown paper made the fire engine red look.
(https://kingstonemodelworks.com/HOn30QRR/cs-96.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-97.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-98.JPG)
Windows still needed to be cut out at this point.
(https://kingstonemodelworks.com/HOn30QRR/cs-98.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-99.JPG)
I cut out the windows and did a bit of weathering, sort of. I mixed up some "Wrought Iron" black which has a somewhat gray tint to it. Thinned it down to a wash and applied it. Don't look to bad. I'll have to dust it up when compete since it'll sit in a dusty part of the rock crusher complex.
(https://kingstonemodelworks.com/HOn30QRR/cs-100.JPG)
Working on the Plexiglas version. Right now I need to cut out some more clap boards.
(https://kingstonemodelworks.com/HOn30QRR/cs-101.JPG)
After the windows and one door got painted I started adding them to the building once they were dry.
(https://kingstonemodelworks.com/HOn30QRR/cs-102.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-103.JPG)
I also started working on the roof. The small shed was to receive shingles, but the larger one I wanted to use standing seam metal panels. Well that led into researching the sizes and when they first started to use this type of roof material. I was at a point of coming up with a jig or fixture to make those roof panels. But I came to my senses and decided that I probably wouldn't get the project finished in time before the dead line of the build challenge. So I'm going with cedar shakes on both roofs.
I had purchased some Spanish Cedar Veneer from the Woodcraft store a while ago. The sheets are .010" thick, perfect for HO shingles. I used my ROBO router to cut the strips.
(https://kingstonemodelworks.com/HOn30QRR/cs-104.JPG)
The finished strips. I cut three different widths of shingles. The sheet is 6.5" wide by 11" long. I separated the sheet into three sizes of shingle width, 5", 6" and 8". They are going to be 24" long. This is according to a spec sheet I found online. I did have a machine malfunction after about the first inch. So I had to start over. This caused the 5" shingles that had already been cut to be cut in half. Had I tried to set the machine to do that it would have never worked out. So the first inch the strips are about 2" HO scale width instead of 5" scale width. The cut lines are a little hard to see due to the grain of the wood.
(https://kingstonemodelworks.com/HOn30QRR/cs-105.JPG)
Once separated into four piles they will be cut to a 24" HO scale length. The pile on the left are the 5" pieces cut in half. next to the right are the 5" scale width, next to the right are the 6" scale width and the next are the 8" scale width strips.
(https://kingstonemodelworks.com/HOn30QRR/cs-106.JPG)
Here's a close up with an HO scale ruler to compare the pieces.
(https://kingstonemodelworks.com/HOn30QRR/cs-107.JPG)
Next will be the roof getting shingled. That'll take a while.
Until then.
Bernd
Moving right along with the shingling of the roof.
When I got the lean-to shed roofs shingled, a problem had to rear its ugly head, it's call Warpage.
(https://kingstonemodelworks.com/HOn30QRR/cs-108.JPG)
I guess when I glue the roof down I'll have to squeeze the excrement out of it again.
Looking to do the rest of the building's roof with a different sub-roof. Maybe plastic and use ACC to glue the shingles down.
Here are some better pictures of the roof project on the sheds. I did brace them with 1/4" square lumber.
(https://kingstonemodelworks.com/HOn30QRR/cs-111A.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-111B.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-111C.JPG)
The reason I didn't glue the sub-roof down first was for the ease of being able to apply the individual shingles easier. Guess I'll have to take the not so easy route and glue down the sub-roof on the main building. I'll add some more bracing also.
Got to the second roof where the angle changes and wondered now what. I used some of that aluminum from those aluminum trays for cooking turkeys in and made a transition piece. I think this is what would have been done on these types of roofs.
(https://kingstonemodelworks.com/HOn30QRR/cs-117.JPG)
(https://kingstonemodelworks.com/HOn30QRR/cs-118.JPG)
The hardest part will be designing working doors and I'm sure that'll take a bit of time to design and build. So back to getting on the roof and more shingling.
Tried some weathering on the lean too shed while gluing down shingles on the main building. Haven't ever done much weathering. Total new experience for me.
(https://kingstonemodelworks.com/HOn30QRR/cs-119.JPG)
Started out with some Hunters Driftwood Weathering Mix. Learned not to lay it on thick but in light layers.
(https://kingstonemodelworks.com/HOn30QRR/cs-120.JPG)
Getting the peak like the prototype was a pain. Didn't quite make it look like the real thing.
(https://kingstonemodelworks.com/HOn30QRR/cs-121.JPG)
Semi-weathered for now.
(https://kingstonemodelworks.com/HOn30QRR/cs-122.JPG)
Still have some trim and doors to make.
(https://kingstonemodelworks.com/HOn30QRR/cs-123.JPG)
Had some warpage issue on the big door opening. I needed to make sure once the building was placed down on the ground that the door opening stayed square, which it wasn't. So, I built up a sort of foundation to keep the large door opening square, meaning the bottom, which was warped, needed to be the same size as the top opening width wise. I glued down some 1/4" square wood to hold the shed in place. The wood foundation fame will hold it squarely so the big doors when build will fit squarely in their opening.
(https://kingstonemodelworks.com/HOn30QRR/cs-124.JPG)
Testing out the fit. It's close on the tractor trailer "Ugly Duck". ;D
(https://kingstonemodelworks.com/HOn30QRR/cs-125.JPG)
And this is how it stands today. Three years later and still not finished. I had to many "shiny objects" to chase after.
(https://www.kingstonemodelworks.com/HOn30QRR/cs-125a.JPG)
Maybe some day it'll get finished.
Bernd
Your shingling looks great!! What glue did you use on the warped cardboard roof to attach the wood shingles? Did you change the glue for the rest of the work?
dave
Quote from: deemery on October 04, 2026, 03:53:07 PMYour shingling looks great!! What glue did you use on the warped cardboard roof to attach the wood shingles? Did you change the glue for the rest of the work?
dave
Thanks Dave.
I used the yellow carpenters glue. No I didn't change the glue. I changed the method. I glued the sub-roof down first and then added the shingle's. I drew lines to help keep them somewhat in a straight line.
Bernd
Howdy Bernd, excellent work on the roof. It complements the structure. Have fun, mike
Quote from: friscomike on October 08, 2026, 09:20:42 AMHowdy Bernd, excellent work on the roof. It complements the structure. Have fun, mike
Thanks Mike.
Bernd
Given your tooling, how would you approach doing subroof panels with lines/scribes to align shingles?
dave
Dave,
Use an Incra ruler! It's a no-brainer. ;D
Rich
Quote from: Pennman on October 08, 2026, 09:39:55 PMDave,
Use an Incra ruler! It's a no-brainer. ;D
Rich
I have one. It works, but sometimes the marks aren't in the correct position, and it's a lot more work than having a tool do it for you.
dave
Quote from: deemery on October 08, 2026, 06:22:15 PMGiven your tooling, how would you approach doing subroof panels with lines/scribes to align shingles?
dave
Go back and check out post #17 where I printed lines on paper to do the clapboards.
Bernd
Quote from: Bernd on October 09, 2026, 10:20:34 AMQuote from: deemery on October 08, 2026, 06:22:15 PMGiven your tooling, how would you approach doing subroof panels with lines/scribes to align shingles?
dave
Go back and check out post #17 where I printed lines on paper to do the clapboards.
Bernd
So a conventional printer and attach the guideline paper to the model...
dave
Quote from: deemery on October 09, 2026, 11:17:57 AMQuote from: Bernd on October 09, 2026, 10:20:34 AMQuote from: deemery on October 08, 2026, 06:22:15 PMGiven your tooling, how would you approach doing subroof panels with lines/scribes to align shingles?
dave
Go back and check out post #17 where I printed lines on paper to do the clapboards.
Bernd
So a conventional printer and attach the guideline paper to the model...
dave
Edited because I place the answer in the wrong area. Also adding another idea.
Works good on square cornered roofs. I don't know how it would work on an octagon style roof as you get near the top.
Bernd
Added note: Since you're using the laser to cut out the roof sections, why not engrave lines on the sections. Instead of printing lines use the laser to engrave them.
B
Bernd, on my little octagonal shed: I did laser engrave guidelines. But as I was still learning, I got the spacing wrong. No real problem, there was enough 'guide' there to keep the shingling straight.
One thing I think I'll do is laser engrave the spacing for shingles and just burn a sheet of subroof stock.
dave
Ok, sounds good.
I did a little research on octagonal roofs. Here's a closeup of a finished roof. Looks like your roof needs to have shingles over the corners like in the picture.
(https://i.pinimg.com/736x/b3/3f/46/b33f460c272ec0a986075b9a514e5c81.jpg)
Bernd
Quote from: Bernd on October 10, 2026, 02:09:38 PMOk, sounds good.
I did a little research on octagonal roofs. Here's a closeup of a finished roof. Looks like your roof needs to have shingles over the corners like in the picture.
(https://i.pinimg.com/736x/b3/3f/46/b33f460c272ec0a986075b9a514e5c81.jpg)
Bernd
Thanks! I can do that...
dave
Very nice shingles Bernd. The whole structure is looking great.
Quote from: deemery on October 10, 2026, 03:26:35 PMThanks! I can do that...
dave
You're welcome.
Quote from: robert goslin on October 10, 2026, 05:49:49 PMVery nice shingles Bernd. The whole structure is looking great.
Thanks Robert. Using real cedar works wonders.
Bernd
Nice work!
The whole project looks great. Nice job on the shingles. I have found that if I put an x brace on the underside of the sub roof it helps keep roof flat. Here is a picture. I use 1/8" stock for this.
Thanks Phil and Mike. Much appreciated.
Bernd