FSM Pile Driver #105

Started by Lynnb, March 16, 2018, 10:47:53 AM

Previous topic - Next topic

Lynnb

Point taken Bob, thanks
So I attached the boiler stack structure thingy and shingled the roof.
Ontario, Canada
The Great White North

My Layout Venture-> https://modelersforum.com/index.php?topic=6003.0

rpdylan

Nice job Lynn! Those shingles will really pop when weathered,. Isn't this a great little kit?
Bob C.

Lynnb

Quote from: rpdylan on March 22, 2018, 10:24:07 PM
Nice job Lynn! Those shingles will really pop when weathered,. Isn't this a great little kit?
Thanks Bob , Sure is a nice kit.
Ontario, Canada
The Great White North

My Layout Venture-> https://modelersforum.com/index.php?topic=6003.0

postalkarl

Hey Lynn:

Yeah she is looking good. You got the shingles nice and straight. Some lifting, A&I and dry-brushing will be really cool.

Karl

Jerry

Lynn shingles looking good.  Your doing a fine job.

Jerry
"And in the end, it's not the years in your life that count. It's the life in your years." A. Lincoln

jerryrbeach

Lynn,

Wow, I don't visit for a couple days and you have done so much! 
Love the entire stack assembly, the derrick looks great, coloring is spot on.  Also, love the added rafters, and like everyone else said, nice job on the shingles. 
You are certainly doing George's offering proud!
Jerry

Lynnb

Quote from: postalkarl on March 23, 2018, 05:20:30 AM
Hey Lynn:

Yeah she is looking good. You got the shingles nice and straight. Some lifting, A&I and dry-brushing will be really cool.

Karl
Thanks Karl , I'm  thinking also floquil Earth on the roof .
Ontario, Canada
The Great White North

My Layout Venture-> https://modelersforum.com/index.php?topic=6003.0

Lynnb

Thanks Jerry, my days off are done until Wednesday so not much will be happening now until then.
Ontario, Canada
The Great White North

My Layout Venture-> https://modelersforum.com/index.php?topic=6003.0

postalkarl

Hi Lynn:

Opps I forgot to mention the earth paint first. I also always do that. Sorry bout missing that step.

Karl

Lynnb

Quite right Karl, to tell you truth I don't like painting the roof part, I'm a bit heavy handed with the paint and I often use the thinner along with the paint so when I see it is going on a bit heavy I thin it on the roof shingles.
Ontario, Canada
The Great White North

My Layout Venture-> https://modelersforum.com/index.php?topic=6003.0

ACL1504

Karl,

As usual, excellent job on another build. I'm enjoying the thread.

Tom ;D
"If we are to guard against ignorance and remain free, it is the responsibility of every American to be informed."
Thomas Jefferson

Tom Langford
telsr1@aol.com

Lynnb

Quote from: ACL1504 on March 24, 2018, 07:26:11 AM
Karl,

As usual, excellent job on another build. I'm enjoying the thread.

Tom ;D
Hate when that happens ;D
Ontario, Canada
The Great White North

My Layout Venture-> https://modelersforum.com/index.php?topic=6003.0

postalkarl

Hi Tom:

This is Lynn's build. I'm the other one.

Karl

postalkarl

Hey Lynn:

Here is the photo I promised. Note where the front & rear bollards are placed. They are placed per the photos of the built model rather than the drawing. This is important especially for the rear bollard as the rope has to go around to the bollard on the rear of the deck. If placed as on the drawing the rope would hit the deck structure.

Karl

ACL1504

Quote from: Lynnb on March 24, 2018, 07:47:50 AM
Quote from: ACL1504 on March 24, 2018, 07:26:11 AM
Karl,

As usual, excellent job on another build. I'm enjoying the thread.

Tom ;D
Hate when that happens ;D


My bad, your is just as good.

Tom ;D
"If we are to guard against ignorance and remain free, it is the responsibility of every American to be informed."
Thomas Jefferson

Tom Langford
telsr1@aol.com

Powered by EzPortal