Nemo's Nets - O scale, 1/48 waterfront scratchbuild

[robert goslin]

Now time for a bit of surgery.  I needed to open up the side wall (the bit without the cladding that is circled) so the interior can be visible when looking through from what will be the side extension.



Then added some timber detail to that wall section and put in the base / interior raised platform and the staircase.




View from the rear showing the interior staircase

[robert goslin]

It was at this point I needed to do some more surgery.  Because I was copying Laurie's model, I added a door that never made any sense.
On the model the inside floor of the main building is raised up because it opens to a raised loading dock at the back.
At the front there is a door that doesn't make sense (circled) as it wouldn't be able to open inwards because of the raised floor.


So I removed this and added on some more plain weatherboards.

So now onto making the angled side extension.






Here you can see where I've removed the offending door, and attached the side extension to the main building.

[Rick]

Nice job on the surgery.
Couldn't have been too easy with the walls together already.
Angled side extension fits well.

[robert goslin]

Thanks Rick.  Wasn't too bad cutting out the hole in the side.  New blade, plenty of shallow cuts and patience did the trick.
Doing that side extension was a bit of a pain because the back wall of it is shorter that the front.
If either are out. it throws off the angle.
So getting the correct angle off the main building took some time. Got it right in the end, after trialling with a cardboard mock up.

Looks like your doing some good hikes in Colorado. Really enjoying your photos.