REA Freight House FOS Scale Models

Started by postalkarl, April 12, 2016, 06:26:36 PM

Previous topic - Next topic

postalkarl

Hi Guys:

Took A photo with some FOS Scale flats behind the structure.

Karl

Dave K.


postalkarl

Hi Dave:

Thanks for the reply.  Much appreciated.

karl

Karl

ACL1504

Quote from: postalkarl on May 05, 2016, 10:42:44 PM
Hi Guys:

Took A photo with some FOS Scale flats behind the structure.

Karl


Karl,

Looks great as do the flats.

Tom ;D
"If we are to guard against ignorance and remain free, it is the responsibility of every American to be informed."
Thomas Jefferson

Tom Langford
telsr1@aol.com

postalkarl

Hi Tom:

Thanks appreciate your compliment. Thanks.

Karl

postalkarl

Hi Guys:

I detailed the back platform. Here's a photo.

Karl

postalkarl

Hi Guys:

Working on the rear upper office addition to the station. Also painted up the part for the laser cut hand trucks. There are 4 in the kit but I damaged one of the frame shuffling parts around. Here's a photo of the part to the hand trucks.

postalkarl

Hi Guys:

I decided to deviate from the instruction a little bit here. Instead of waiting till the walls were assembled and the sub roof was on I decided to install my corbels while the wall were flt. Just seemed easier than assembling it and turning the building upside down to install the corbels.

Karl

postalkarl

Hi Guys:

I actually assembled 1 of the laser cut hand-trucks. Went way better than I thought it would. Just be very careful not to drop any of the parts as they are very small.

Karl

postalkarl

Hi:

Opps one handle is a little crooked but they are so small you can't see it on the model.

Karl

postalkarl

H:

3 hand trucks are assembled. 2 are on the model one on each platform. The 3rd will go on the other platform when it is built.

Karl

postalkarl

Hi Guys:

Here's 2 finished walls for the upper rear office.

Karl

trainguy2024

Very nice.  What type of paint did you use on this kit? 

postalkarl


Hi Trainguy:

Thanks for the compliment. The following paints were used on this kit:

1) Floquil Depot Olive, Zinc Chromate primer And Earth.

2) Krylon Spray Red Oxide primer. Almost an Exact match for Floquil Zinc Chromate primer. Roof and windows and doors are sprayed with it.

3) Apple Barrel #20526 Country Gray for dry-brushing.

That's about it except for A&I washes.

Karl


donatode

Still looking good .... and I'm still tagging along.


Powered by EzPortal