Pratt's Cove

Started by Larry C, August 29, 2026, 03:13:39 PM

Previous topic - Next topic

Rick

Not sure if I would have noticed the square pilings if you hadn't mentioned it.
So far so good.

Mark Dalrymple

Coming on nicely, Larry.

Cheers, Mark.

Larry C

Quote from: Rick on September 23, 2026, 06:18:11 PMNot sure if I would have noticed the square pilings if you hadn't mentioned it.
So far so good.

Thanks Rick, much appreciated. That's good so knocking off the edges on the pilings worked as I had hoped.

Quote from: Mark Dalrymple on September 23, 2026, 08:36:13 PMComing on nicely, Larry.

Cheers, Mark.

Thank you Mark and thanks for stopping by.
Current Projects: Pratt's Cove
                           
http://www.ussvigilant.blogspot.com

Jerry

Larry a very nice job on those pilings.
Good coloring and nice barnacles.

Jerry
"And in the end, it's not the years in your life that count. It's the life in your years." A. Lincoln

friscomike

Howdy Larry,

The pier looks great with the shed and seawall.  This promises to be another nice build.

Have fun,
mike

Larry C

Quote from: Jerry on September 24, 2026, 11:30:55 AMLarry a very nice job on those pilings.
Good coloring and nice barnacles.

Jerry

Thank you Jerry; appreciate your nice comments.

Quote from: friscomike on September 24, 2026, 05:07:27 PMHowdy Larry,

The pier looks great with the shed and seawall.  This promises to be another nice build.

Have fun,
mike

Thank you Mike; I hope so.
Current Projects: Pratt's Cove
                           
http://www.ussvigilant.blogspot.com

Larry C

IMG_029.jpg

After finishing the dock I wanted to have the wood decking continue around the building. Used 2x10's given my usual treatment and extended the decking down the left side. This will be an area with lots of details.

IMG_032.jpg

On this side I wanted rails coming into the scene. I use Ho scale rail and set it as a narrow gauge with 2 ft between the rails. Being a New England scene I went with that gauge because of the 2 ft narrow gauge that existed in Maine. I measured the distance between the rails then glued them in place. There won't actually be a car on the tracks so the precision wasn't critical. Used 1x6's for the decking and between the rails.

IMG_031.jpg

Her's a better view of the rails that run to the back edge of the diorama. The transitioning between the wood was interesting but worked out just fine. Next I think I'm going to switch gears and start working on the fishing boat that will go in front of the dock. I want the boat finished before I even think of adding the water. Thanks for stopping by for a look and for all your great comments and all those helpful suggestions.



Current Projects: Pratt's Cove
                           
http://www.ussvigilant.blogspot.com

Philip


Rick


robert goslin

Great looking dock Larry.  And nice that you've include some nod to a railroad by including the rails.

To appreciate how small those Maine 2 footers were, here's one next to a standard gauge loco.

Regards  Rob
Melbourne,  Australia
Borrow money from pessimists – they don't expect it back

deemery

Light narrow rail, white flags running extra.  With that many boxcars, I'm guessing this would be Sandy River & Rangley Lakes.

dave
Modeling the Northeast in the 1890s - because the little voices told me to

PRR Modeler

Larry great job so far. I assume there will be stairs to get off the platform to the ground? Also, I like the green metal roof.

Robert that photo shows the true size difference.

Curt Webb
The Late Great Pennsylvania Railroad
Freelanced PRR Bellevue Subdivision

Powered by EzPortal