Pratt's Cove

Started by Larry C, August 29, 2026, 03:13:39 PM

Previous topic - Next topic

elwoodblues

YIPES!!!!! I've missed a lot since the last time I looked in.  :o

The boat is looking fantastic.  I agree with Dave's comments about the buoys and ropes attached to those trap.  A little weathering and some junk added to the boat (it looks too pristine) and you will have an award winner there.  Love the name.
Ron Newby
General Manager
Clearwater Valley Railroad Co.
www.cvry.ca

Jerry

This gets better every time I look in!!
Wonderful job Larry.

Jerry
"And in the end, it's not the years in your life that count. It's the life in your years." A. Lincoln

robert goslin

Hi Larry. The boat is really coming together now that you are adding all the extra details.
As others have mentioned, adding some buoys to the traps would give it some extra detail.
And also some extra colour, as buoys marking are specific to the owner.

I made mine from 2.4mm styrene tube and some rod, with twisted wire for the rope loop.


Regards  Rob
Melbourne,  Australia
Borrow money from pessimists – they don't expect it back

Rick

All the added details look very good.

deemery

Ayuh, looks like a wicked lobstuh boat!   (Translation, "Yes, it looks like an excellent lobster boat")

dave
Modeling the Northeast in the 1890s - because the little voices told me to

Larry C

Thanks guys for your nice comments and for the suggestions; looks like a little more
finessing will ensue.
Current Projects: Pratt's Cove
                           
http://www.ussvigilant.blogspot.com

Philip


Larry C

Current Projects: Pratt's Cove
                           
http://www.ussvigilant.blogspot.com

Philip


Larry C

IMG_064.jpg

So back to land. Made a basic cabin for either Mr.Pratt or the Lighthouse Keeper, if I can make a lighthouse, but haven't fully decided yet. Used my usual construction of 6x6's for the framework, 1x10's for the outside walls which were grained and  colored with grey chalk w/ clear alcohol then given a liberal coat of A&I. Also included a weathered door and blackout windows since the inside is not detailed.

IMG_065.jpg

Here's the one end.....

IMG_066.jpg

And the back.

Next up will be the gable trim and the roof which will be the same as the other building. Not going to do a front porch since this is going to be very basic. After that's done then it'll be onto scenery material and details for that area. And yes I'll be revisiting the boat to finish that up.

Thanks for stopping by and leaving all your great comments and/or suggestions.
Current Projects: Pratt's Cove
                           
http://www.ussvigilant.blogspot.com

PRR Modeler

Larry very nice job on the hut.

If I might suggest a very thin dry brush of flat white. To me it makes the structures look older and says "sea" to me.
Curt Webb
The Late Great Pennsylvania Railroad
Freelanced PRR Bellevue Subdivision

elwoodblues

Larry, the building looks great.

To add to Curt's suggestion you might want to add a darker wash along the bottom of the building to indicate rain and dirt wicking up the boards from the ground.
Ron Newby
General Manager
Clearwater Valley Railroad Co.
www.cvry.ca

Pennman

Nice work on the structure Larry. At least somebody's building something.

Rich

Powered by EzPortal