Pratt's Cove

Started by Larry C, August 29, 2026, 03:13:39 PM

Previous topic - Next topic

Larry C

Rick thanks. I'll mess around adding the suggestions later today.
Current Projects: Pratt's Cove
                           
http://www.ussvigilant.blogspot.com

Jerry

Larry looks good.
Just need some weathering like other guys mentioned.

Jerry
"And in the end, it's not the years in your life that count. It's the life in your years." A. Lincoln

Larry C

Jerry thanks and that's the next item on my agenda.
Current Projects: Pratt's Cove
                           
http://www.ussvigilant.blogspot.com

Larry C

IMG_068.jpg

Just a quick update. As suggested by Curt and Ron I weathered the cabin a little bit more. Made up a wash of 50/50 water and white craft paint then applied that to the entire outside. Then I used some brown chalks and a little water and applied that to the bottom of each board and let it "wick up" naturally. Also added the gable trim of 4x4's to give it that New England flair.

IMG_067.jpg

Here's the front and the wicking isn't quite as noticeable until you get close to it. Thanks for stopping by for a look see.
Current Projects: Pratt's Cove
                           
http://www.ussvigilant.blogspot.com

friscomike

Howdy Larry,

Mr. Pratt must be pleased with the progress on his cabin.  Nice work!

Have fun,
mike

Larry C

Thanks Mike; he's been keeping an eye on this one.
Current Projects: Pratt's Cove
                           
http://www.ussvigilant.blogspot.com

Philip


PRR Modeler

Looks great Larry.
Curt Webb
The Late Great Pennsylvania Railroad
Freelanced PRR Bellevue Subdivision

Larry C

Philip thank you and Curt thanks for the weathering tip.
Current Projects: Pratt's Cove
                           
http://www.ussvigilant.blogspot.com

Rick

Larry, sorry, but I'm going to nit pick.
The bottom edge of the boards needs to be darker.
I wouldn't have used a was of white.
All that needed is soaking a brush with A&I and hold it to the bottom of the boards.
The A&I will wick up into the boards.

Powered by EzPortal