Moose Head Flats - An Adventure in On30

Started by robert goslin, November 10, 2026, 10:44:45 PM

Previous topic - Next topic

Jerry

"And in the end, it's not the years in your life that count. It's the life in your years." A. Lincoln

robert goslin

Thanks Curt, Marty, Larry, Rick and Jerry.
I'm now satisfied with the dummy turnout, and not fussed at all that it doesn't actually work, as it wasn't ever going to be used anyhow.  This is purely a "roundy" exhibition layout.  And when at home in my study, just a nice piece of work to look at with some movement.
I know that Laurie Green had done this on some of his small "roundy" layouts to save on the expense of buying a turnout.

I've moved onto rock carving now.
Regards  Rob
Melbourne,  Australia
Borrow money from pessimists – they don't expect it back

robert goslin

Rock retaining wall for below the cliffs at the rear of the layout.
Stones carved into the blue foam with pen.





Regards  Rob
Melbourne,  Australia
Borrow money from pessimists – they don't expect it back

Mike the Trainman

Rob your off to a great start. Looking forward to following along.
Mike Mace
Northern Division of the Santa FE

PRR Modeler

Curt Webb
The Late Great Pennsylvania Railroad
Freelanced PRR Bellevue Subdivision

Larry C

Rob nice rocks; betcha you don't her that often in conversation. Looking forward to
seeing how you finish this off.
Current Projects: Pratt's Cove
                           
http://www.ussvigilant.blogspot.com


robert goslin

Thanks Mike, Curt, Larry and Rick
Carving stones, bricks etc into foam is what a lot of the 1/35 military modellers do to make their buildings, so I study a lot them on Youtube.
Regards  Rob
Melbourne,  Australia
Borrow money from pessimists – they don't expect it back

robert goslin

I've been building structures for the layout over the last few weeks and separately documenting those over in the scratchbuiling thread.
The first one was the mine entrance.  Walls made for stir sticks and the tin roof is a 1/48 corrugated paper product.
Full build here:-https://modelersforum.com/index.php?topic=7822.0







Regards  Rob
Melbourne,  Australia
Borrow money from pessimists – they don't expect it back

PRR Modeler

The shed looks outstanding especially the roof Rob.
Curt Webb
The Late Great Pennsylvania Railroad
Freelanced PRR Bellevue Subdivision

robert goslin

Thanks Curt.  Yep a simple little structure but looks the part.
I finally seem to have perfected a consistent method for weathering the corrugated tin.
Regards  Rob
Melbourne,  Australia
Borrow money from pessimists – they don't expect it back

robert goslin

The other structure I have completed so far is the little cabin to go down next to Squirrel Creek.
Again, I have a tried a new method.  Usually for my structures I build a core / sub walls out of 2.5mm box board, and then clad this with timber sheet like clapboards, etc.
This time I've actually carved the wide planks & grain directly onto the matboard.
Full build here of the cabin:-
https://modelersforum.com/index.php?topic=7830.0

Same shape as the run down wreck of a cabin that Geoff did, but mine is in good condition but heavily weathered.

Geoff's version of his cabin


My version


And here is a quick recap of how I built mine.










Shingles are hand cut card strips


Shingles painted & weathered


Finished cabin










Regards  Rob
Melbourne,  Australia
Borrow money from pessimists – they don't expect it back

Powered by EzPortal