CCK'S Causeway Canning Company - Build Challenge 2016

[Raymo]

Time to do some more, I'll post later.

[jimmillho]

Cool looking building.  I will be following this.

Jim

[Raymo]

Cool looking building.  I will be following this.

Jim

Thanks Jim.

[Raymo]

With the paint set up, I pulled out the sign and sanded the backside of it with fine sand paper.

[Raymo]

I then applied a piece of transfer tape.

[Raymo]

I cut the sign down and applied to the building, burnishing it into the clap boards

[Raymo]

Then another layer of weathering was applied by lifting some random clap boards and dry brushing Ceramacoat Drizzle Grey onto the walls.

[Raymo]

When that dried, I then applied a light A&I wash. It was at this point I realized I forgot to put nail holes on the water side wall.   2 steps forward one step back   Up next, windows and assembly.

[MAP]

Looking great!  I really like Groovie's kits, and you're doing a very nice job on this one!  Keep the photos coming. 

[Raymo]

Great job so far Raymo! I think Groovy has some great structures.

Tom

Yes, Groovy does make some great structures. 

[Raymo]

When all 4 walls are put together the right way they make a basic box.

[Raymo]

When it comes time to door the windows and doors, I like to cut them from the sprues and clean them up before paint.

[Raymo]

I save the nice cardboard advertisements that kit manufacturer's send out with their shipments for painting these items.

[Raymo]

The windows and doors were painted with some white primer. I'll let that set up and then start the weathering.

[Twopoint2]

Dan

Did you use a rattle can to paint the white primer?