Gondola empties

Started by cduckworth, March 01, 2025, 01:35:36 PM

Previous topic - Next topic

cduckworth

Receivers were notorious for cleaning out their docks into an empty gondola. Here's a Frisco model on the layout of an example.  Also a couple gons showing unpainted interiors.
Charlie Duckworth
Modeling the Mopac and Rock Island in the Missouri Ozarks.

jbvb

As a kid, I don't recall there ever being an empty gondola around my home town. I've made my interiors dirty but haven't simulated worn off paint.  Yours look like you've got more experience.
James

ACL1504

Charlie,

Well done. Love the rusted look and misc. junk.

Tom 
"If we are to guard against ignorance and remain free, it is the responsibility of every American to be informed."
Thomas Jefferson

Tom Langford
telsr1@aol.com

Jerry

"And in the end, it's not the years in your life that count. It's the life in your years." A. Lincoln

friscomike

Howdy Charlie,

The interiors of the gons are fantastic.  Of course, the exteriors look great, too.

Have fun,
mike
My current build is the Layout scenery and miscellaneous rolling stock .

Michael Hohn

Charlie,

Excellent job on the gons.  The wood floor is particularly splendiferous in its worn, weathered, and dirty state.

Mike. 

GPdemayo

Great looking cars Charlie..... 8)
Gregory P. DeMayo
General Construction Superintendent Emeritus
St. Louis & Denver Railroad
Longwood, FL

nycjeff

Hello Charlie, what a great looking group of empty gons. A lot of nice details on cars with nothing in them.
Jeff Firestone
Morristown, Arizona
modeling the New York Central in rural Ohio in the late 1940's

cduckworth

To replicate the rust I make a mixture of yellow and brown dry pigments with 91% alcohol in an old plastic coffee lid. Then using a wide, soft brush 'paint the interior.  As the alcohol evaporates it collects around rivets and other details.  Once the interior is dry you can add more of just the dry mix to the corners to add more variety.  In the CoG gon I used a yellow pencil to add scrapes to the sides. Black PanPastel was then used on the top of the sides on the insides.
Charlie Duckworth
Modeling the Mopac and Rock Island in the Missouri Ozarks.

deemery

Quote from: cduckworth on March 03, 2025, 07:48:27 AMTo replicate the rust I make a mixture of yellow and brown dry pigments with 91% alcohol in an old plastic coffee lid. Then using a wide, soft brush 'paint the interior.  As the alcohol evaporates it collects around rivets and other details.  Once the interior is dry you can add more of just the dry mix to the corners to add more variety.  In the CoG gon I used a yellow pencil to add scrapes to the sides. Black PanPastel was then used on the top of the sides on the insides.
Thanks for the details.  I suspect that would work on my wood cars using different pigments to get a similar weathered effect.

dave
Modeling the Northeast in the 1890s - because the little voices told me to

cduckworth

I built a Sunshine Models ATSF last year for a client and painted the wood portion of the interior with grays and browns and used the rust wash on the steel ends and floor. 
Charlie Duckworth
Modeling the Mopac and Rock Island in the Missouri Ozarks.

Powered by EzPortal