Using a 3D printer to Scratchbuild (Santa Fe Freight House}

Started by Mike the Trainman, October 29, 2026, 12:31:29 AM

Previous topic - Next topic

Mike the Trainman

After all the windows were done I started installing the window glazing. I used Microscale Micro Kristal Klear for the windows. I used a toothpick to apply the Kristal klear to each window pane. It go on white but dries clear. It takes about 2 hours to dry but I let it sit overnight. The last photo show the first two windows after drying. I also painted the window sills with same paint as the door lintels/
Mike Mace
Northern Division of the Santa FE

elwoodblues

Mike, using Kristal Klear looks like a very time consuming process that requires patience.  The end result is worth the effort.
Ron Newby
General Manager
Clearwater Valley Railroad Co.
www.cvry.ca

Jerry

Mike great job on those windows!!

Glazing looks perfect.

Jerry
"And in the end, it's not the years in your life that count. It's the life in your years." A. Lincoln

Mike the Trainman

Thanks Ron it really isn't that bad after working with it for awhile. It takes about 15 minutes to do each set of windows. There are 7 windows in each large window. It turned out to be the best way to solve the uneven backside of the windows.
Mike Mace
Northern Division of the Santa FE

Mike the Trainman

Here is a photo of the finished wall and loading dock after painting, glazing and bolted together.

Next up is loading up the dock with details, before putting a roof over the loading dock.
Mike Mace
Northern Division of the Santa FE

Mike the Trainman

Mike Mace
Northern Division of the Santa FE

Mike the Trainman

The next step was to get all the details for the loading dock together. One of the things I do is when I'm doing a print after the main piece Is set on the build plate of the printer I use up the remaining space with details. It doesn't matter how much stuff is on the build plate. The time to print come from how high what your printing is. Most of my print time are in the 1 to 2.5 hours. I have a plastic bin that I keep all kinds of details separated into plastic sandwich bags.

In these pictures I have started placing details around the loading dock.
Mike Mace
Northern Division of the Santa FE

Mike the Trainman

#37
After Sorting details it was time to paint. Some were painted with rattle cans. I used Rust-oleum paints Black, flat khaki and sand all flat. I used various colors of Vallejo Paint for the rest. I find it is a lot easier to drill the resin casting to glue a toothpick in to use for a handle.( metal castings eat a lot of drill bits)

Mike Mace
Northern Division of the Santa FE

Mike the Trainman

#38
While sorting casting for the loading dock I found I was short some details I wanted on the dock. I made up some 55 gal drums on pallets along with some other details. It took about an hour and fifteen minutes to print. Here are some pictures showing the slice program I use to set up for 3D printing.(this is for the large sign to go on the roof)
Mike Mace
Northern Division of the Santa FE

Mike the Trainman

Here are the 55gal drums I printed before painting.
Mike Mace
Northern Division of the Santa FE

robert goslin

Great update Mike.  This home 3D printing seems to be the go.  Don't have to wait for someone else to do it for you, and you can never have enough detail parts. Layouts & dioramas swallow them up pretty quickly.
Excellent lot of details, and interesting that you can print the detail part at the same time to save on time.
Regards  Rob
Melbourne,  Australia
Borrow money from pessimists – they don't expect it back

Mike the Trainman

Thanks Rob it makes a big difference being able to make your own details when needed. Here is a project I did last year for my layout. The structure is scratch build with all the doors, windows and details being printed with my 3D printer.( it is based on a Fine Scale Miniatures Kit)  Because it was a Tire Dealer I needed a lot of tires. I named it after a friend who works in auto repair. The last picture is on the layout.
Mike Mace
Northern Division of the Santa FE

Powered by EzPortal